VIBRATING CONVEYORS

Vibratory equipment is designed to simply convey, feed or screen product. Conveyors and feeders are often used in concert to efficiently move product in and through a process plant.

The Vibratory Movement Vibrating, again by definition, means “to move back and forth rapidly.” The equipment and process solutions described in this guide all use this rapid “back and forth” motion to
move or convey product. On a vibratory feeder, material is “thrown” up and forward so that it drops to the surface at a point further down the tray. This is the feeder’s amplitude.
The number of times per minute that this repeats is the frequency. A third variable is the angle of deflection… meaning how high the product is thrown as compared to its horizontal movement.

Each vibratory feeder or conveyor is designed with a different amplitude, frequency and angle of deflection in order to move different materials at specific rates. The equipment’s design is based on many factors including the material being processed, flow rate of the process, nature of the environment, need to start and stop (cycle) the process, cost to operate the equipment and likelihood of repairs. All of these considerations are covered in some detail.

Fiedls Of Application Are - In the dust-free transfer of micronized materarials, - In the transfer of corrosive materials(Quartz,Feldspath and other silicates) without corrosion problems, -In the required capacities from 1 tone/hour to 40 tone/hour, -In the ranges from 1,5 m. to the required distances.

VİBROMOTOR